Advantages
- Modern, intelligent, microprocessor-controlled equipment
- Fully automatic operation
- Self fault indication for safety
- Long-life infrared sensor cell
- Equipment meeting the latest standards
- Reasonable price
- National service background,
- 3-year warranty in case of operation according to the manual
Certificates
CE conformity
EN 50402:2017,
EN 50104:2020,
EN 50271:2018,
EN 50402:2017,
EN 50054:2000,
EN 50057:2000,
System design
Sensing data
Detectable gas: CO2
Measuring range: 0-1 tf %
Calibration gas: CO2 1 tf % (10,000 ppm)
Recommended signal levels for SENS-EX CMA-S
Signal level I: 0.25 tf % (2500 ppm)
II. signal level: 0.5 tf % (5000 ppm)
III. signal level: 0.75 tf % (7500 ppm)IV. signal level: 1 tf % (10,000 ppm)
Wiring
Placement
The sensor must be placed 30-50 cm from ground level on a side wall or on a vertical surface. One sensor can cover an area of around 25-50 m2, but the design of the room and the areas where the gas can stop must be taken into account.
Cabling
Depending on the distance between the SENS-EX TG/A-I-CO2-1-S sensor and the control panel, use a 4-core, 0.75-1.5 mm2, twisted-pair, shielded circular cable with a maximum resistance of 25 Ohm/1000 m. Use a stranded wiring principle between the control panel and the sensor, connecting all sensors in the system in series.
| Technical specification | |
| Supply voltage | 24V DC (230V AC) |
| Power consumption | Max. 200mA |
| Sensor output signal | SENS-EX-V |
| Ambient temperature | 0°C to +50°C |
| Environmental pressure | 900-1100 mBar |
| Ambient humidity | 15 – 90 rH% |
| Protection (IEC 529) | IP54 |
| Size, weight | 125x105x60mm; ≈0.5 kg |
| Signal processing | Microprocessor |
| Cable connection (cable entry) | Fork clamp ( gland ) |
| Built-in sensor type | Infrared |
| Expected lifetime of the sensor | is 5-10 years |
| Method of sampling | Diffusion |
| Setup time | <30 sec |
| Flow rate | max 5 m/s |
Accessories/Order Information
TG/AI-CO2-1-A
Complete transmitter
