SENS-EX TG/AE-NH3- ARD/ACD/ACRD

ammonia sensor with independent display
The SENS-Ex TG/AE-NH3-…-D is an independent explosion-proof ammonia gas detector transmitter. Depending on the type, the sensors have a relay, 4-20 mA and SENS-EX-RS output. The sensors are thus suitable for an addressable system, but they can also function as independent sensors. It is suitable for detecting ammonia gases produced in cold stores, food processing plants or technology.

Advantages

  • Modern, intelligent, microprocessor-controlled equipment
  • Fully automatic operation
  • Self fault indication for safety
  • ppm level chemical cell sensor
  • Equipment according to the latest standards
  • Reasonable price
  • Explosion-proof design
  • National service background
  • 3-year warranty in case of operation according to the manual

Certificates

CE conformity

EN 50402:2017,

EN 50104:2020,

EN 50271:2018,

EN 50402:2017,

EN 50054:2000,

EN 50057:2000,

EN IEC 60079-0:2018,

EN 60079-1:2015,

EN 60079-29-1:2017,

EN 50402:2017,

System design

Sensing data

Detectable gas: NH3

Measuring range: 0-100 ppm

Calibration gas: NH3

Relay output (AR, ACR): 24 VDC 1A

4-20 mA: 4 mA=0 ppm, 20 mA=100 ppm

Signal level I: 25 ppm

II. signal level: 50 ppm

III. signal level: 75 ppm

IV. signal level: 100 ppm

Wiring

Placement

The sensor must be placed 30-50 cm from ground level on a side wall or on a vertical surface. One sensor can cover an area of ​​around 25-50 m2, but the design of the room and the areas where the gas can stop must be taken into account.

Cabling

The sensor must be wired with the necessary cable, for 4-20 mA a minimum 3-core cable, in the case of a relay, the cable required to connect the control is recommended, with a maximum of 8-core cable.

Technical specification
Supply voltage24V DC (230V AC)
Power consumptionMax. 200mA
Sensor output signal4-20mA, relay output
Displayseven-segment LCD and LED
Ambient temperature -20°C to +50°C
Environmental pressure900-1100 mBar
Ambient humidity15 – 90 rH%
Protection (IEC 529)IP54
Size, weight125x105x60mm; ≈0.5 kg
Signal processingMicroprocessor
Cable connection (cable entry)Terminal block (plug)
Built-in sensor typeChemical cell
Expected lifetime of the sensor3 years
Method of samplingDiffusion
Setup time<30 sec
Flow ratemax 5 m/s
A sign of protectionEx II 2 G Ex db IIC T6 Gb

Accessories/Order Information

SENS-Ex TG/AE-NH3-AC
Explosion-proof 4-20mA transmitter

SENS-Ex TG/AE-NH3-AR
Explosion-proof relay transmitter

"*" a kötelező mezőket jelöli

Name*
Country*

Can’t find the gas or system you’re looking for? Please Contact Us and we’ll find a solution for you.

You may also be interested in these products

SENS-EX TG/A-I-CO2-1-A

címzett széndioxid gázérzékelő távadó

SENS-EX TG/A-E-CONO2-A-GS

címzett széndioxid és nitrogéndioxid duál gázérzékelő távadó

SENS-EX TG/A-E-CO-A-G

címzett garázs szénmonoxid gázérzékelő távadó